Engineering Insights for Saudi Industry.
Practical technical content on white metal bearings, rotating equipment components, cutting tools, machining, automation, reverse engineering and industrial localisation.
What we write about.
- Bearings & Rotating Equipment Components
- Cutting Tools
- Precision Machining
- Automation
- Reverse Engineering
- Localisation & Vision 2030
- Company News
Recent articles.
What Information to Include in a Bearing, Machining or Tooling RFQ
Most enquiries that take a long time to quote are not difficult jobs, they are jobs where the information arrived in pieces. What to…
Read the article
How Cutting-Tool Regrinding Can Reduce Replacement Cost and Downtime
Carbide tooling is not really a consumable. When to send a tool, what separates a good regrind from a bad one, and the uptime…
Read the article
Localising Industrial Spares in Support of Vision 2030
The real cost of an imported spare, what can realistically be localised, and how to start item by item rather than all at once.
Read the article
Reverse Engineering Obsolete Industrial Components: A Practical Guide
Producing a replacement from the part itself, from capturing geometry to recovering tolerances the drawing never recorded.
Read the article
Why Custom Carbide Tools Can Outperform Standard Tools in Difficult Applications
The symptoms of a tooling mismatch, where custom carbide earns its place, and why cost per part is the only number that matters.
Read the article
When to Refurbish or Replace a Turbine Bearing Component
Three technical factors decide it, and getting it wrong costs either money or uptime. A practical decision path.
Read the article
How Centrifugal Casting Supports Reliable Babbitt Bearing Lining
A white metal bearing is only as good as the bond behind the lining. What spin casting actually does, and how the bond is…
Read the article
White Metal vs. Rolling-Element Bearings: Where Hydrodynamic Bearings Are Used
The two bearing families fail differently and suit very different duties. How to choose deliberately rather than by inheritance.
Read the article